EU Schuko Plug GFCI Power Cord, CEE 7/7 Type F Male Plug with Inline Ground Fault Circuit Interrupter

EU Schuko Plug GFCI Power Cord: IEC 60320-C13 to CEE 7/7, for 16A/230V Equipment Safety Compliance

Meet essential EU market safety requirements with our inline EU Schuko Plug GFCI Power Cord. This engineered solution pairs a CEE 7/7 Type F (Schuko) male plug with a pre-wired, IEC 60320-C13 female connector, featuring an integrated 10mA Class A GFCI module. Certified to VDE, CE, and EN 60320 standards, it delivers 16A/230V protected power, enabling OEMs and distributors to provide compliant personal protection for industrial equipment, machinery, and appliances operating in damp or outdoor European environments.

Why Choose Our EU Schuko GFCI Power Cord?

European safety directives (e.g., Machinery Directive) and national regulations increasingly demand GFCI (RCD Type A) protection for portable equipment used where there is a risk of electric shock. Our cord provides a certified, ready-to-use accessory that ensures end-user compliance, mitigates liability, and simplifies the certification pathway for your 230V products.

Full EU Normative Compliance

The GFCI module is certified to DIN VDE 0664-100 (RCD Type A, 10mA sensitivity) and the entire cord set complies with EN 60320. The Schuko plug is VDE-approved with reinforced earthing contacts, and the assembly carries full CE marking, providing a verified compliance solution for equipment destined for the EU, UK, and other 230V markets.

Ruggedized Design for Harsh Duty

Constructed with a heavy-duty H05RN-F or H07RN-F rubberized cable (oil, water, and abrasion resistant, -25°C cold-flex) and a sealed, high-impact GFCI housing rated to IP44. This ensures reliable operation on construction sites, in workshops, and for outdoor cleaning equipment, where cables are exposed to physical stress and moisture.

Simplified Integration for OEMs

For equipment manufacturers, this cord serves as a factory-approved, certified safety accessory. It eliminates the need to design and certify a built-in GFCI circuit, reducing development time and cost. The standardized IEC C13 outlet makes it compatible with a vast range of machinery power inlets.

Complete Product Specifications

Professional Applications You Can Trust

This cord is a critical safety accessory for manufacturers and distributors of portable industrial equipment like pressure washers, floor scrubbers, and concrete saws sold in the EU. It ensures the end product can be operated safely on construction sites and in municipal cleaning operations, directly addressing Annex I of the EU Machinery Directive concerning risks from electricity.

Essential for workshops, facilities, and event production companies across Europe. It provides protected power for stage lighting, sound systems, portable tools, and catering appliances used in damp outdoor locations or on concrete floors, protecting personnel from electric shock where TT earthing systems are common and fault currents can be hazardous.

Advanced Safety Features

The internal circuit monitors for both sinusoidal AC residual currents and pulsating DC currents (Type A), which are prevalent in equipment with rectifiers or phase-angle control (e.g., variable-speed tools, some appliance motors). The manual reset model requires a conscious user action to restore power, which is mandatory under certain EN standards for professional equipment to ensure fault investigation after a trip.

The module incorporates advanced immunity against nuisance tripping from voltage surges and electromagnetic interference (EMI), meeting the rigorous EMC requirements of EN 61000. A functional test button allows for prescribed monthly user verification, and an End-of-Life circuit permanently disables the device if internal electronics fail, preventing a latent safety hazard.

Manufacturing Excellence

Produced in a process audited to ISO 9001:2015, using components from certified EU suppliers where specified. Each GFCI module is 100% functionally tested at 0.5x, 1x, and 2x its rated tripping current. Final assembly undergoes Hi-Pot testing (2000V AC), ground continuity verification, and a final trip test with a calibrated RCD tester (Patton & Patton or equivalent). Test certificates are available per batch.

​​​​​​​

Frequently Asked Questions

Q: Why is this GFCI rated for 10mA, not 5mA like some US products?

A: European standards (IEC/EN 61008) define a 10mA (±5mA) sensitivity for Type A RCDs used for personal protection in most equipment applications. A 30mA RCD is standard for fixed installations. The 10mA level provides a high degree of personnel safety while offering greater immunity to cumulative leakage from long cables or multiple connected devices, which is a practical consideration for industrial cord sets.

Q: Is this cord suitable for use in the UK or Switzerland with adapters?

A> No. The UK (BS 1363) and Switzerland (SEV 1011) have their own plug standards and safety requirements. Using an adapter with a GFCI cord is not recommended and may violate safety certifications. We offer dedicated variants with BS 1363 (UK Plug) and SEV 1011 (Swiss Plug) for those markets.

Q: Can we get this cord with a different output connector, like an IEC C19 or a bare wire?

A: Yes, we offer extensive customization for OEM clients. Common variants include an IEC C19 connector (for higher power equipment), stripped/tinned wire leads for direct chassis connection, or even a country-specific socket (e.g., a German Schuko socket) on the output side. contact us with your specific requirement.

Q: What is the lead time for CE/VDE certified samples and volume production?

A: Certified samples of our standard model can be dispatched within 10 working days. Standard production lead time for volume orders is 5-7 weeks. For custom connector or cable specifications, an additional 1-2 weeks for tooling/sampling may be required.

Custom Solutions for Your Business

We are a specialist in EU-compliant safety cord sets. Beyond connector customization, we can develop cords with higher current ratings (25A), extended temperature ranges, specific cable colors (e.g., yellow for hazard areas), custom logos on the GFCI housing, and packaging tailored for your retail or B2B distribution channels. Our technical team can advise on the optimal configuration for your target market's regulations.

Contact Us

Ready to discuss your EU Schuko Plug GFCI Power Cord requirements for compliance and safety? Contact us at liz@szkuncan.net to request VDE/CE certification documents, technical drawings, and OEM pricing for your European market entry or safety upgrade project.