European 2-Pin Male to Female Extension Power Cord

Unlike an IEC appliance cable, this product uses a European two-pin male-to-female extension structure. Its non-grounded 2-core construction is intended for compatible low-power or Class II devices that do not require a protective earth connection. Typical order configurations include 250V AC, 2x0.75mm² cable, and lengths from 0.5m to 3m.

Why Choose Our European 2-Pin Extension Cord?

This cable provides appliance manufacturers, electrical accessory distributors, and OEM buyers with a compact extension solution for compatible European two-pin equipment.

Two-Pin Male-to-Female Connection

The male plug connects to a compatible European power outlet, while the cable-mounted female connector accepts a matching two-pin appliance plug. This extends the original cable without changing it to an IEC connector system.

Non-Grounded Two-Core Construction

The two-pin connection uses line and neutral conductors without a protective earth conductor. It is suitable only for equipment specifically designed for non-grounded power input.

Molded Ends with Strain Relief

The molded male and female connector bodies enclose the cable terminations. Integrated strain relief supports the cable at frequent bending points during connection, routing, storage, and daily use.

Configurable for OEM and Bulk Orders

Cable length, wire gauge, female connector molding, jacket material, cable color, marking, label, logo, and packaging can be configured according to the target application and destination market.

Complete Product Specifications

Buyer's Insight: This product is a European two-pin male-to-female extension cord, not an IEC C17 connector for a C18 inlet. Before ordering, confirm the female connector dimensions, plug compatibility, complete cord rating, cable length, and destination-market requirements. Because the assembly has no protective earth conductor, it must not be used as a substitute for a grounded Schuko extension cord.

Professional Applications You Can Trust

For lamps, chargers, adapters, and compact household electronics, this cable extends an existing European two-pin power connection when the fixed outlet is too far from the device. Multiple length options help accommodate different room and installation layouts.

For seasonal lighting and display equipment, the compact female connector can extend a compatible two-pin plug without adding a large multi-outlet block. The molded construction also supports convenient installation and storage.

For OEM and distribution projects, buyers can align the cable length, female connector molding, jacket, cable marking, label, and packaging with the intended product bundle and sales market.

Advanced Safety Features

The molded male plug and female connector enclose the cable terminations. Strain relief at both ends helps reduce concentrated bending where the cable enters each molded body.

This is a non-grounded extension cord with no protective earth conductor. It should only be used with compatible two-pin equipment that does not require grounding and within the confirmed rating of the complete cable assembly.

The final plug rating, female connector rating, wire gauge, cable marking, and certification configuration should be confirmed according to the connected load and destination-market requirements.

Manufacturing Excellence

This European two-pin male-to-female extension cord can be configured for B2B and OEM purchasing requirements. Buyers can confirm the cable length, conductor size, female connector dimensions, molded profile, jacket material, cable marking, label, and packaging before production.

Frequently Asked Questions

Q: Is the female end an IEC C17 connector?

A: No. This product is specified as a European two-pin male-to-female extension cord. The output end is a two-pin female extension connector rather than an IEC appliance connector.

Q: Does this extension cord include grounding?

A: No. It uses a non-grounded 2-core construction and is intended only for compatible equipment that does not require protective earth.

Q: What current rating is commonly available?

A: A 2.5A configuration is common when the male end uses a standard Europlug. The final rating must be based on the lowest-rated component in the complete assembly.

Q: Can the cable length and female connector molding be customized?

A: Yes. Common lengths include 0.5m, 1m, 1.5m, 1.8m, 2m, and 3m. Wire gauge, connector molding, jacket, color, cable marking, label, logo, and packaging can also be customized.

Custom Solutions for Your Business

Cable Length: Common lengths from 0.5m to 3m are available, with custom lengths offered for appliance bundles, replacement cables, and project orders.

Wire Gauge & Jacket: 2x0.75mm² is a common option. The final conductor and jacket configuration can be matched to the required cord rating and destination market.

Female Connector Molding: Connector body dimensions, cable entry direction, grip profile, and strain-relief shape can be confirmed according to the mating plug and equipment layout.

Cable Marking & Color: Cable color, printed identification, warning information, and product labels can be customized according to the approved order specification.

Branding & Packaging: Custom logo, label, inner packaging, carton marking, and OEM packaging are available upon request.

Contact Us

✔ OEM & ODM Support | ✔ Connector Matching Support | ✔ Custom Specification Support | ✔ B2B Quotation Support

For an accurate quotation, please provide the cable length, required current rating, wire gauge, female connector dimensions or mating plug sample, destination market, certification requirement, packaging method, and estimated order quantity.