_1787794003617.webp)
_1787794006394.webp)
_1787794014074.webp)
NEMA 5-15P to Dual IEC C5 Power Splitter Cord with Independent Switches
Standardized Receptacles: Built with a space-saving 90-degree right-angled NEMA 5-15P male plug and two IEC 320 C5 (Mickey Mouse) female connectors, ensuring universal compatibility with standard laptop power supplies and AV hardware.
Industrial-Grade Construction: Constructed utilizing heavy-duty 18AWG/16AWG pure copper conductors and a durable PVC jacket. This guarantees stable voltage transmission and superior resistance to heat, continuous abrasion, and physical wear.
Space and Cost Efficiency: The 1-to-2 splitter architecture eliminates the necessity for multiple bulky wall adapters and power strips. This optimizes rack density and streamlines complex IT cable management setups immediately.
Certified Safety Standards: Engineered to satisfy strict UL/cUL safety certifications alongside RoHS compliance, providing reliable low-temperature operation, minimal voltage drop, and verified electrical protection in high-demand commercial environments.
- Product Description
NEMA 5-15P to Dual IEC C5 Power Splitter Cord with Independent Switches | High-Density Power Management
Deploying efficient power architectures in dense IT racks requires precision. The NEMA 5-15P to Dual IEC C5 Power Splitter Cord with Independent Switches provides exact power routing for dual-device setups. Built with a 90-degree angled plug and individual rocker switches, this 1-to-2 Y-splitter effectively eliminates wall-wart crowding. Tested for 0.1% defect rates. It delivers verified stable 125V AC transmission under continuous commercial load.
Why Choose Our NEMA 5-15P to IEC C5 Splitter?
Engineered for commercial environments where standard cables fail to provide adequate control.
Right-Angled NEMA 5-15P Design
The 90-degree male plug profile reduces cord strain by directing the cable parallel to the wall or PDU. This structural alignment prevents accidental unplugging in tight server cabinets. Facility managers can push equipment up to 2 inches closer to the wall, maximizing expensive floor space.
Dual Color-Coded Rocker Switches
Incorporates an inline splitter block featuring distinct red and green mechanical switches for each C5 branch. This physical isolation allows technicians to cycle power to a single laptop or AV unit independently. Hard-rebooting a frozen device no longer disrupts the adjacent connected hardware.
Complete Product Specifications
| Parameter | Specification |
|---|---|
| Standard Classification | NEMA 5-15P to 2 x IEC 320 C5 (Mickey Mouse) |
| Voltage Rating | 125V AC |
| Current Capacity | 10A / 13A (Dependent on wire gauge) |
| Wire Gauge | 18AWG / 16AWG Pure Copper |
| Jacket Material | Flame-retardant PVC (SJT/SPT-2) |
| Switch Type | Individual Mechanical Rocker (Red/Green) |
| Certifications | UL/cUL, RoHS, REACH |
Buyer's Insight: Most generic Y-splitters simply divide current without physical controls, leading to simultaneous power loss during maintenance. The color-coded switch block on this model significantly reduces human error during fast-paced IT troubleshooting. Procurement teams note a 40% reduction in cable clutter complaints from end-users deploying dual-laptop testing stations.
Professional Applications You Can Trust
In high-density laptop charging carts, space is strictly limited. Powering multiple notebook bricks (which often utilize C5 inlets) typically demands expansive power strips. This splitter cord halves the required wall outlets. IT administrators can manage dual power bricks from a single NEMA 5-15P socket efficiently.
Testing laboratories face constant equipment power cycling. The inline red/green rocker switches allow engineers to physically cut power to specific diagnostic units. This directly prevents voltage spikes to adjacent sensitive hardware during reboot sequences.
Advanced Safety Features
Safety dictates continuous operation parameters. Pure copper conductors ensure voltage drop remains below standard thresholds even at peak 10A continuous loads. The flame-retardant PVC jacket self-extinguishes, meeting strict commercial fire codes.
The integrated switch block housing is sonic-welded to prevent moisture ingress and mechanical separation. Both rocker switches are rated for over 10,000 actuation cycles. This specific mechanical tolerance mitigates the risk of internal arcing common in cheaper snap-fit housings.
Manufacturing Excellence
Backed by 17 years of specialized cable assembly experience. Every cord undergoes a 100% factory Hi-Pot (Dielectric Withstand) and polarity test before packaging. We source only compliant, virgin PVC and certified copper to maintain our rigorous 0.1% defect rate across high-volume production batches.
Frequently Asked Questions
Q: What is the maximum continuous power rating for this splitter cord?
A: When configured with 16AWG wiring, the assembly safely handles up to 13A at 125V AC. We recommend limiting continuous draw to 80% of the maximum rating for optimal thermal management in enclosed racks.
Q: Are the inline switches rated to handle the full load simultaneously?
A: Yes. The internal mechanics of both the red and green rocker switches are independently rated to handle the specified peak current. Cycling one switch does not induce voltage sags on the active parallel circuit.
Q: What is the standard sample dispatch timeline for custom configurations?
A: Standard off-the-shelf samples ship within 3 business days. For customized wire lengths or specific AWG requirements, engineering samples are typically dispatched within 7-10 business days following specification approval.
Custom Solutions for Your Business
We tailor solutions for specific deployment architectures. Length: Specify main trunk and branch lengths to eliminate slack in your exact cabinet dimensions. Wire Gauge & Material: Upgrade to 16AWG or 14AWG for higher current demands, or select specialized jacket materials for industrial environments. Custom Molding: We can modify the 90-degree NEMA plug angle (left, right, down) to match your PDU orientation. Branding: Imprint your corporate logo or specific circuit identification directly onto the switch block housing for easier field maintenance. Low MOQ Sampling: We support pilot runs for data center evaluations.
Contact Us
✔ Rigorous QC Testing | ✔ OEM & ODM Welcomed | ✔ Fast Sample Dispatch
Ready to discuss your NEMA 5-15P to Dual IEC C5 Power Splitter Cord requirements? contact us at rhea@szkuncan.net for expert guidance and competitive pricing.
USER EVALUATE
Here is the customer's evaluation of us